
special remind
The warranty of industry automation components and parts that "amikon" 1-year warranty.
Quad Core Controller
Mark VIe Controller
Altitude for Normal Operation :
0-1000 m at 101.3 to 89.9 kPa
Memory Type:
2 GB DDR3-1066 SDRAM
with error correcting code
DC Power Supply
AC Input Voltage Range: 90-132V or 180-264V
Nominal Output DC Voltage: 24 VDC
Operating Temperature:
Typically 0°C to 50°C (32°F to 122°F)
Typically -20°C to 70°C (-4°F to 158°F)
5-slot baseplate
Series 90-30
CPU Baseplate
25-Pine D-Type Female Connector
Option modules: Slot 2-5
Unnumbered slot: Power supply module
Expansion cable: Expansion cable
Discrete Input module
Series:Series 90-30
Part Number:IC693MDL752
Product type:Digital I/O
Product Description:Discrete output module
Compatibility:GE Fanuc 90-30 PLCs
No of Channels:Thirty-Two (32)
Output points:32
No. of output groups:Four (4)
Output groups:4
Channels per group:Eight (8)
Maximum inrush current:4.6 A for 20 ms
Output connection:2 x 24-pin connectors
Input Module
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693MDL646
Rated Voltage:24 Volts DC
No of Channels:Sixteen (16)
Input signal range:0-30 VDC
On-state Voltage:11.5 to 30 Volts DC
Off-state Voltage:0 to +5 Volts DC
Off state voltage:0-5 VDC
On-state Current:3.2 mA minimum
Off-state Current:1.1 mA maximum
On response time, typical:1 ms
Off response time, maximum:1 ms
Nominal Input voltage:24 VDC
AC Output Module
Series:Series 90-30
Part Number:IC693MDL330
Product Type:Output Module
Rated Voltage:120 to 240 V AC
Outputs:8
Output Current Per Point:2 A
Single-Slot CPU Module
Series:Series 90-30
Part Number:IC693CPU364
Serial port:RS-485 (via power supply
User memory:240K Bytes
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Microprocessor:80386EX
Processor speed:25 Megahertz
Register memory:240 kilobytes
Number of Ethernet ports:One (1)
Profibus interface module
Series:Series 90-30
Part Number:IC693CBL305
Cable Length:1 Foot
Cable type:Wye Cable
Wire Shield:Yes
Average Weight:2.0 Pounds
Cable Housing:Yes
Conducting Material:28 AWG Size Wire
DSM302 motion controller module
Series:Series 90-30
Part Number:IC693DSM302
Compatible components:Programmable logic controllers
Block processing time:Less than 5 milliseconds
Number of axis:2
Serial port:RS-232
Non-volatile storage:10 programs and 40 subroutines
Analog Current/Voltage Combination Module
Series:Series 90-30
Part Number:IC693ALG442
Accuracy:0.25% at 25 degree Celsius
Product Lifecycle Status:Discontinued/Obsolete
No of Output Channels:2, single-ended
Update Rate:8 milliseconds
No of Input Channels:4 differential
Resolution at 0-10 V:2.5 mV
Resolution at -10 to 10 V:5 mV
Input Impedance:800 K Ohms
Power Supply, 24 Vdc, High Capacity. Battery not included. Battery is now included in the CPU backplane box.
Standard Power Supply module
Part Number:IC693PWR321
Series:90-30 PLC
Brand:GE Fanuc
Product Type:Standard Power Supply
Protocol Support:RS485
No. of Outputs:Three (3)
Input Voltage Range, AC:85 to 264 VAC
Input Voltage Range, DC:100 to 300 VDC
Description:Power supply
Voltage:85-264 Volts AC / 100-300 Volts DC
Voltage output:5/24 Volts DC
Communication:RS 485
Power:30 watts
Installation:Leftmost slot of the baseplate
relay output module
Series:Series 90-30
Part Number:IC693MDL940
Minimum Load:10 mA
On Response Time:15 ms maximum
Off Response Time:15 ms maximum
No of Channels:Sixteen (16)
Contact Form:Normally Open (N.O.)
No. of groups:Four (4) groups
Inrush Current:5 Amperes
Outputs per Module:16
Maximum Inrush:5 Amps
Product Lifecycle Status:Discontinued/Obsolete
positive logic output module
Series:Series 90-30
Part Number:IC693MDL740
Product Description:Positive Logic output module
Module Circuit type:Sourcing
No of Channels:Sixteen (16)
Nominal Voltage output:12/24 volts DC
No. of groups:Two (2) groups
Inrush Current:4.78 Amperes for 10 ms
Output Voltage Drop:1 volt maximum
ON Response time:2 ms maximum
Product type:Digital I/O
Compatibility:GE Fanuc 90-30 PLCs
Output points:16
Module peak current draw:110 milliamps
Module input voltge 5 Volts DC
Relative humidity:5 to 95%
Analog output module
Series:Series 90-30
Part Number:IC694ALG391
Channel update rate:5 ms
Product Description:Analog output module
Output signals:0-20 mA / 4-20 mA
No of Channels:Two (2) output channels
Digital Resolution:12 bits, typical
Range:4-20 mA, 0-20 mA
External Supply Voltage Range:20 to 30 VDC