PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- BSP10 369B1879G5001
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
BSP10 369B1879G5001 Speed protection module base
General Electric BSP10 369B1879G5001 is the connection base associated with the OC 6000e MSP10 speed-detection and protection module. It provides the module, field-terminal and cable interfaces for configured rotational-speed supervision in turbine and industrial process-control equipment.
The photographed BSP10 is marked 24 V DC and contains two shielded RJ45 sockets, three module mating receptacles, a removable field-terminal block and two female D-sub connectors. Two rotary cams retain the companion module. Speed-channel processing, trip settings and protection performance belong to the complete MSP10/BSP10 assembly and its approved configuration.
The photographed BSP10 is marked 24 V DC and contains two shielded RJ45 sockets, three module mating receptacles, a removable field-terminal block and two female D-sub connectors. Two rotary cams retain the companion module. Speed-channel processing, trip settings and protection performance belong to the complete MSP10/BSP10 assembly and its approved configuration.
BEFORE YOU BUY
Confirm the complete speed protection module base
ACTUAL APPLICATIONS
Application context for BSP10 369B1879G5001
BSP10 369B1879G5001 is the connection base for compatible OC 6000e speed-protection electronics. Configured turbine assemblies serve power generation and industrial petroleum and chemical production. The speed module, sensor circuits and approved protection settings determine suitability.
-
01 · POWER GENERATION
Turbine Power Generation and Heat Production
Gas Turbine Power GenerationSteam Turbine Power Generation -
02 · OIL & GAS
Natural Gas Processing and Petroleum Production
Natural Gas ProcessingPetroleum Production and Processing -
03 · CHEMICAL PROCESSING
Chemical Manufacturing and Petrochemical Production
Industrial Chemical ManufacturingPetrochemical Production and Refining
Technical specifications for BSP10 369B1879G5001
-
Product ModelBSP10 369B1879G5001
-
Product ParametersSpeed protection module base
-
In stock10 units
-
ManufacturerGeneral Electric
-
Marked supply voltage24 V DC
-
Network connection hardware2 shielded RJ45 sockets
-
Module mating interface3 multipole board receptacles
-
Auxiliary cable interfaces2 female D-sub connectors
-
Chassis fixing points4 panel mounting holes
-
Module retention2 rotary locking cams
-
Grounding connection1 protective-earth clamping point
-
Rail retentionSpring-latch DIN rail fixing
View all additional
Alternative Names
BSP10 369B1879G5001
OC 6000e Speed protection module base
OC 6000e BSP10 carrier
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate BSP10 369B1879G5001 speed protection module base
General Electric BSP10 369B1879G5001 is the connection base associated with the OC 6000e MSP10 speed-detection and protection module. It provides the module, field-terminal and cable interfaces for configured rotational-speed supervision in turbine and industrial process-control equipment.
Match the BSP10 369B1879G5001 label, supply marking, connector arrangement and existing terminal assignment to the installed equipment. Compare the photographed interface with the wiring record before connecting the supplied article.
Retain the approved configuration and complete the installed equipment's documented signal and functional checks for BSP10 369B1879G5001. Use the applicable site drawings for pin assignments; connector appearance alone does not establish interchangeability.
Features:
- Marked supply voltage: 24 V DC
- Network connection hardware: 2 shielded RJ45 sockets
- Module mating interface: 3 multipole board receptacles
The BSP10 369B1879G5001 speed protection module base requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify BSP10 369B1879G5001 speed protection module base
Verify the complete BSP10 369B1879G5001 article identity and its installed role before replacement. Compare the terminal or relay interface and the companion hardware with the existing unit.
Record the BSP10 369B1879G5001 wiring, grounding connection and mechanical retention before removal. Isolate the affected circuits and preserve the approved control configuration and relevant signal assignments.
After fitting the verified BSP10 369B1879G5001 article, restore the documented connections and configuration. Complete the affected input, output or relay checks and retain the acceptance results with the equipment record.
Features:
- Marked supply voltage: 24 V DC
- Network connection hardware: 2 shielded RJ45 sockets
- Module mating interface: 3 multipole board receptacles
The BSP10 369B1879G5001 speed protection module base requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the BSP10 369B1879G5001 speed protection module base must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size17.30 × 12.50 × 6.30 cm
-
Shipping weight0.35kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginChina
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about BSP10 369B1879G5001
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which speed electronics are associated with BSP10?
BSP10 369B1879G5001 is identified with MSP10 speed-detection and protection electronics. Match the MSP module and the documented turbine speed-circuit arrangement before replacing the base. -
Does a bare BSP10 determine the overspeed trip setting?
BSP10 369B1879G5001 is the connection base. Overspeed thresholds and protection behavior depend on the MSP10 electronics and approved turbine configuration; they cannot be derived from the base label. -
How many D-sub connections appear on the speed base?
The photographed BSP10 369B1879G5001 has two female D-sub connectors as well as its removable field-terminal block. Keep the existing cable identities and pin assignments separate. -
What supply rating can be confirmed for BSP10?
The exact BSP10 369B1879G5001 label states 24 V DC. Sensor excitation, pickup voltage and relay-contact ratings need the applicable assembled speed-module documentation. -
Where does the speed module engage with its carrier?
BSP10 369B1879G5001 has three multipole mating receptacles and two rotary retainers. Inspect those contacts and locks before commissioning the assembled speed hardware. -
What test record should follow a BSP10 exchange?
Retain the approved MSP10 speed configuration when replacing BSP10 369B1879G5001. Complete the documented speed-channel and protection-circuit acceptance checks before returning the turbine to service. -
Which information is useful for a speed-base enquiry?
Provide BSP10 369B1879G5001, the MSP10 article label, terminal and D-sub photographs, required quantity and the installed speed-channel arrangement. Specify the requested base or assembled-module scope. -
What establishes the identity of a delivered BSP10?
Compare the BSP10 369B1879G5001 label, 24 V DC marking, two D-sub connectors, terminal block and module receptacles. Inspect the grounding point and rotary retainers before fitting it.
READY TO VERIFY YOUR PART?
Get a BSP10 369B1879G5001 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
