PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Dual probe vibration monitor
Bently Nevada 3300/65 is a dual-probe vibration monitor. The monitor combines same-axis relative shaft displacement and casing vibration to derive absolute shaft vibration. It also provides separate relative, seismic and gap information. The manufacturer describes its use on fluid-film-bearing machines where significant shaft vibration is transmitted to the casing.
The 3300/65 is the Dual Probe Monitor for combined shaft and bearing-housing measurements. This record does not establish a complete ordering configuration. Range, selected transducer, relay, approval and barrier options remain unassigned until the full installed identity can be verified.
The 3300/65 is the Dual Probe Monitor for combined shaft and bearing-housing measurements. This record does not establish a complete ordering configuration. Range, selected transducer, relay, approval and barrier options remain unassigned until the full installed identity can be verified.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 3300/65 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
02 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
03 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations.
Technical specifications for 3300/65
-
Product Model3300/65
-
Product ParametersDual probe vibration monitor
-
In stock9 units
-
ManufacturerBently Nevada
-
Signal combinationSame-axis proximity and seismic signals
-
Nominal consumption1.5 W
-
Input impedance10 kohm for proximity and two-wire seismic inputs
-
Proximity scale selection200 or 100 mV/mil, jumper selectable
-
Signal conditioning accuracy at +25 deg C+/-0.33% full scale typical; +/-1% maximum without Trip Multiply
-
Recorder formats4-20 mA, 0 to -10 Vdc, or +1 to +5 Vdc
-
Current-recorder load0-600 ohm
-
Buffered connectionsFront relative and absolute coaxial outputs; seismic test point
-
Transducer supply-24 Vdc, channel current limited
-
Operating temperature0 to +65 deg C
-
Storage temperature-40 to +85 deg C
-
HumidityUp to 95%, noncondensing
-
Gap indicationAverage shaft radial position from proximity gap
-
DisplayVertical LCD bargraph, 63 segments per channel
View all additional
Alternative Names
3300/65
3300/65 dual-probe vibration monitor
Bently Nevada 3300/65
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DUAL PROBE VIBRATION MONITOR
Integrating 3300/65
The monitor combines same-axis relative shaft displacement and casing vibration to derive absolute shaft vibration. It also provides separate relative, seismic and gap information. The manufacturer describes its use on fluid-film-bearing machines where significant shaft vibration is transmitted to the casing.
Match the proximity transducer scale and selected Seismoprobe or Velomitor input. Both transducers must measure along the same machine axis. The absolute measurement is a vector combination, not the simple arithmetic addition of two unrelated amplitude readings.
Install the proximity and seismic sensors on the same axis and verify polarity, scale, gap and selected relay arrangement. Follow the official field wiring drawing and its single-point shield-grounding arrangement. Confirm whether the recorded outputs represent relative/absolute or relative/seismic measurements.
Features:
- Match input type, measurement range, relay arrangement and field wiring
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3300/65 dual-probe vibration monitor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3300/65 requires comparing input type, measurement range, relay arrangement and field wiring. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Match the proximity transducer scale and selected Seismoprobe or Velomitor input. Both transducers must measure along the same machine axis. The absolute measurement is a vector combination, not the simple arithmetic addition of two unrelated amplitude readings.
A 2011 manufacturer notice placed 3300 monitors in repair-only Phase 4, subject to component availability, and estimated transition to unsupported Phase 5 in January 2014. That estimate is not confirmation of the actual transition date for this exact order. The notice explicitly excluded 3300 I/O modules. No delivered hardware revision or unconditional successor compatibility is established.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3300/65 dual-probe vibration monitor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3300/65 dual-probe vibration monitor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size6x20x33.0cm
-
Shipping weight0.9 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3300/65
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 3300/65?
The 3300/65 is the Dual Probe Monitor for combined shaft and bearing-housing measurements. This record does not establish a complete ordering configuration. Range, selected transducer, relay, approval and barrier options remain unassigned until the full installed identity can be verified. -
What is its monitoring function?
The monitor combines same-axis relative shaft displacement and casing vibration to derive absolute shaft vibration. It also provides separate relative, seismic and gap information. The manufacturer describes its use on fluid-film-bearing machines where significant shaft vibration is transmitted to the casing. -
What must match in the installed system?
Match the proximity transducer scale and selected Seismoprobe or Velomitor input. Both transducers must measure along the same machine axis. The absolute measurement is a vector combination, not the simple arithmetic addition of two unrelated amplitude readings. -
Which applications suit this product?
The manufacturer identifies large steam and gas turbines with fluid-film bearings as examples where shaft vibration can be transmitted to the casing. The monitor combines the matched relative and seismic signals. -
What should be checked during installation?
Install the proximity and seismic sensors on the same axis and verify polarity, scale, gap and selected relay arrangement. Follow the official field wiring drawing and its single-point shield-grounding arrangement. Confirm whether the recorded outputs represent relative/absolute or relative/seismic measurements. -
Can the 1-600 Hz setting be used for every rapid startup?
The manufacturer does not recommend the low-frequency option for startup or coastdown rates exceeding 1,000 rpm per second. Retained transient response may keep a Danger indication beyond its configured delay even after vibration falls. -
Are two probes on different machine axes suitable for the absolute calculation?
No. The manufacturer specifies that the proximity and seismic transducers be installed in the same axis. The absolute result depends on the correct vector relationship between the signals.
READY TO VERIFY YOUR PART?
Get a 3300/65 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
