PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Invensys
- Triconex
- 7400210-010 AI2351
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
7400210-010 AI2351 Analog input baseplate for the Tricon safety instrumented system
Triconex 7400210-010 AI2351 is a Analog input baseplate used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 7400210-010 AI2351
Manufacturer documentation places the Analog Input Baseplate in practical safety applications. The three cases below describe different operating tasks in which 7400210-010 AI2351 performs its documented product-family role with the configured companion equipment.
- 01 · POWER GENERATION
Coordinate fuel-gas isolation during confirmed fuel-system trip
During operation of the gas-pressure signals and double-block valves, 7400210-010 AI2351 handles its designated signal or control duty as a Analog Input Baseplate. During confirmed fuel-system trip, the system uses this function to close the documented isolation path, helping it stop fuel flow to the protected equipment. - 02 · OIL & GAS
Verify wellhead shutdown during trip demand process control
At the control layer of the pressure transmitters and shutdown valves, 7400210-010 AI2351 operates in its approved product-family role as a Analog Input Baseplate. During trip demand, the system uses this function to evaluate the approved cause-and-effect inputs, helping it limit continued hydrocarbon release. - 03 · CHEMICAL & PETROCHEMICAL
Synchronize tank overfill prevention during proof-test sequence
For the coordinated operation of the level instruments and isolation valves, 7400210-010 AI2351 performs its assigned control role as a Analog Input Baseplate. During proof-test sequence, the system uses this function to record input and final-element response through the test, helping it demonstrate the assigned safety function.
Technical specifications for 7400210-010 AI2351
-
Product Model7400210-010 AI2351
-
Product ParametersAnalog input baseplate
-
In stock1 unit
-
ManufacturerInvensys
-
Component TypeAnalog input baseplate
-
Assembly Number7400210-010
-
Baseplate Model2351
-
Compatible ModuleTrident 3351 AI module
-
Channel Capacity32 analogue inputs
-
Signal Service4 to 20 mA transmitters
-
Termination MethodDirect field terminal blocks
-
Field Power InputsTwo redundant supply connections
-
Protective ConnectionDedicated safety-ground terminal
-
Module KeyingMechanically keyed I/O location
-
Mounting StylePanel-mounted Trident baseplate
-
Wiring IdentificationNumbered point terminals
-
Spare PositionSupports online hot-spare module
-
Inspection PointVerify jumpers and terminal torque
-
Commissioning ScopeTest every connected field channel
View all additional
Alternative Names
7400210-010AI2351
Triconex 7400210-010 AI2351
Invensys 7400210-010 AI2351
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match 7400210-010 AI2351 to the installed Triconex configuration
Triconex 7400210-010 AI2351 is a Analog input baseplate for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: 7400210-010 AI2351
- Product class: Analog input baseplate
- Model-specific values listed in the specifications
The Triconex 7400210-010 AI2351 requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex 7400210-010 AI2351 only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete 7400210-010 AI2351 identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex 7400210-010 AI2351 requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete 7400210-010 AI2351 identity, installed system and applicable revision.
Features:
- Model-specific data sheet prepared for 7400210-010 AI2351
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex 7400210-010 AI2351 must match the installed system and revision; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
- 01
Shipping & delivery
- DispatchEligible stock: same / next day
- CarriersDHL, FedEx or UPS
- Ship fromXiamen, China
- Packed size24.7 × 23 × 6 cm
- Shipping weight1.3 kg
- 02
Payment & customs
- PaymentBank transfer (T/T)
- CurrenciesUSD · EUR · GBP · RMB
- Credit cardsNot accepted
- HS reference8538900000
- OriginUnited States
- 03
Warranty & returns
- Warranty12 months from AMIKON
- InspectionLabel, condition and packing checks
- ReturnsPrior RMA authorisation required
- CompatibilityConfirm before order
- OEM warrantyDoes not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
Part checked
Full suffix recordedCondition checked
Label and appearancePacking checked
Antistatic protectionTracking supplied
Established couriersSandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 7400210-010 AI2351
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which analog input module mates with baseplate AI2351?
For the Analog input baseplate, component type is Analog input baseplate. Confirm this identity against the installed nameplate and cabinet records. -
How are the 32 transmitter channels terminated on assembly 7400210-010?
For the Analog input baseplate, baseplate model is 2351. Use the manufacturer value when checking the existing hardware and field circuit. -
What function does the 100 ohm precision resistor provide?
For the Analog input baseplate, channel capacity is 32 analogue inputs. Record the actual installation before any connector, module or terminal is moved. -
Where are the redundant 24 V field-power connections landed?
For the Analog input baseplate, field power inputs is Two redundant supply connections. Keep the documented arrangement intact and correct any discrepancy before energising. -
How should shields be wired for the 4-20 mA input circuits?
For the Analog input baseplate, mounting style is Panel-mounted Trident baseplate. Review the indicated condition together with active controller diagnostics. -
What short-circuit current can occur during a field fault?
For the Analog input baseplate, spare position is Supports online hot-spare module. Do not assume interchangeability from appearance; the complete configuration must agree. -
Why must unused AI2351 points follow the documented termination practice?
For the Analog input baseplate, inspection point is Verify jumpers and terminal torque. Retain the result in the maintenance record for the affected safety function. -
Which loop-current checks verify all channels after baseplate replacement?
For the Analog input baseplate, commissioning scope is Test every connected field channel. Complete the stated commissioning check before returning the equipment to service.
READY TO VERIFY YOUR PART?
Get a 7400210-010 AI2351 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
