Vibration Transmitter
Operatingtemperature-35°C to +85°C
Storagetemperature-52°C to +100°C
Power Requires +12 to +35 Vdc input atthe transmitter terminal
Frequencyresponse5 Hz to 6,000 Hz +0, 3 dB.
Minimumtarget size 9.5 mm (0.375 in) diameter.
NonHazardous,Zone 2 or Div 2Hazardousarea locationsPower Supply: 28 V
DIN Rail Ruggedized Ethernet Switch
DIN Rail mounted managed Ethernet switch (wall mounting possible)
Metal housing
Up to 10 ports (electrical, optical or SFP cages)
Up to 3 GbE ports (electrical, SFP or Combo ports)
Multimode and Single Mode versions available
Huge variety on optical ports (e.g. SFP cages, SC, ST)
SFP’s in various versions available (MM, SM, single fibre)
Low voltage (18 - 60 VDC) or high voltage (48 - 320 VDC, 90 - 265 VAC) power supply
Redundant power supply possible
Typical power consumption: 12 - 21 W
system rack
Operating Temperature Range: -25°C to +65°C
Storage Temperature Range: -40°C to +85°C
Humidity: 0-95%
Input Voltage: 48V DC
Module Capacity: The rack can accommodate up to 15 slot modules
Rack Dimensions: 19 inch rack width, in compliance with industry standards
Power Supply Module
From the Vibro-Meter ® product line
Power supply unit for VM600 system rack (6U)
High performance
Wide input voltage range
Over-voltage protection
Continuous short-circuit proof
Minimal derating within the operating temperature range
6U height
Compact design
Fully VME compatible
Conforms to EC standards for EMC
Machine Protection Card
Measurement range: 0.001 gpm to 2.0 gpm
Resolution: 0.0001 gpm
Frequency range: 2 Hz to 10 kHz
Sensor type: piezoelectric sensor
Display mode: Color LCD display screen
Interface: RS232, USB
CPU Card
Brand: Meggitt Vibro-Meter
Product Series: VM600
Model: CPU M 200-595-074-122 / 200-595-100-014
Product Type:CPU Control Card
Operating Temperature Range: -20°C 到 +70°C
Operating Humidity: 0-95%
CIRCUIT BREAKER
Brand: GE
Model: FGN36AA630NNF
Product Type: Circuit Breaker
Rated Current: 630A
Poles: 3 Poles
Phases: 3 Phases
Short Circuit Capacity: 50kA
Differential pressure transmitter
• Flow measurement (volume flow or mass flow) in conjunction with differentialpressure sensors in gases, vapors and liquids
• Level, volume or mass measurements in liquids
• High process temperatures up to 400 °C (752 °F) possible with diaphragm sealmoun
Measuringrangesfrom –10 to +10 mbar (-0.15 to +0.15psi)
to –40 to +40 bar (-600 to +600 psi)
Processtemperaturerange 1)–40 to +85 °C (–40 to +185 °F)
ReferenceaccuracyUp to ±0.035 % of the set span
Supply voltagenon-Ex
• 4 to 20 mA HART: 10.5 to 45 V DC
• PROFIBUS PA and FOUNDATION Fieldbus: 9 to 32 V DC
Supply voltageEx ia10.5 to 30 V DC
Output 4 to 20 mA with superimposed HART protocol, PROFIBUS PA or FOUNDATION Fieldbus
Options High-pressure version up to pstat700 bar (10500 psi)
INPUT MODULE
P0916KP0B
INPUT MODULE
NUMBER OF COMMUNICATION INPUTS: 16
NUMBER OF TERMINATIONS: 32 - SCREW
CABLE TYPE: 4
CABLE CONNECTION: 37 PIN [M] CONNECTION
CARD
APPPS7PCUC
APPLICOM PCU1500S7 CARD
PROFIBUS (S7/MPI)
1 CHANNEL
PCI 3.3/ 5V -OPC/DLL/DAS - SCADA/HMI
(1120110006)
Control Module
Part Number: UNS0118A-Z
Type: Control Module
Voltage: 24V DC
Operating Temperature: Typically -20°C to +60°C
Storage Temperature: -40°C to +85°C
Thermal resistance signal input card
Thermocouple: -200°C to 1800°C
RTD: -200°C to 850°C
Thermocouple: ±0.5°C or ±0.1%
RTD: ±0.2°C or ±0.1% o
Nominal Voltage: 24V DC
Power Consumption: ≤3W
Input/Output Isolation: 1500V AC
Operating Temperature: -20°C to 70°C
Storage Temperature: -40°C to 85°C
Memory card
The Siemens SIMATIC S7 series
RAM memory card for S7-400.
The memory size is 256kbyte.
Type of memory Flash-EPROM
Memory size 256 Kbyte
Weight 51 g
Terminal Board
P0916SA0A
DISCONTINUED BY MANUFACTURER
PLC MODULE WITH DIN MOUNT
8 SCREW TERMINALS
CABLE TYPE 4 INPUT
120 VAC
125 VDC
Relay control board
Operating Voltage: 24V DC
Operating Temperature: -20°C to +70°C
torage Temperature: -40°C to +85°C
Relay Type: Multi channel relay, supporting control of multiple devices
Contact Rating: Typically ranging from 5A to 10A, suitable for various industrial current loads
Contact Voltage: Supports 24V DC or 110-230V AC operating voltage
Supported Signal Voltage: Typically 24V DC
Processor Module
Model: 51403393-200
Operating Voltage: 24V DC
Power Consumption: Low power design
Operating Temperature: 0°C to +60°C
Storage Temperature: -40°C to+85°C
CPU Type: High performance embedded processor, specifically optimized for control systems
