General Electric

PROFINET Scanner (PNS) module interfaces a remote node of VersaMax modules to a PROFINET IO Controller. Two 10/100 Mbps copper interfaces. Requires Proficy Machine Edition 7.0

Auxiliary Smart Battery Module for PACSystems. Provides low battery signal to the CPU. Module mounts external to the controller.

DeviceNet Master Module for RX3i. Module can only be located in the CPUbase. The module is on the high speed serial bus.

Isolated Analog Output module, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.

Modbus Master module for VersaMax Genius NIU. Module supports one RS-485 serial port.

Cable I/O non-shielded 2 connectors .5M for connector-style carrier

48VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 points)

Profibus DP Slave Module

Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC694T

Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V. The analog

RX3i serial communications module. Four isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane.

Input module 24 VDC 16 point POS/NEG logic.

Energy Pack Cable, 3 ft. (0.91m)

IC697MDL340
DISCONTINUED BY MANUFACTURER
OUTPUT MODULE
SERIES 90-70
16 POINTS
120 VAC
50/60 HZ
2 AMPS
HIGH INRUSH CAPACITY (10X RATED CURRENT)

IC600BF841
DISCONTINUED BY MANUFACTURER
INPUT MODULE
SERIES SIX
4POINT
ANALOG
0-10VDC