Honeywell

Enhanced Logic Manager Module

Input Voltage:Typically 24 VDC 
Power Consumption:Around 25 W
Operating Temperature Range:Typically -20°C to 60°C
Storage Temperature Range:-40°C to 85°C.
Relative Humidity:5% to 95% non-condensing.

Power Supply

POWER SUPPLY
230 VAC

Two -synchronous- processors
Flash memory for system and applicationprogram
RAM with battery backup (battery located inBKM-0001)
Data comparators for the processors and theirmemory
Minimum and maximum execution timemonitor
Memory error handler
1oo2D functionality
24V and 5V monitoring
Emergency Shut Down Input (24V)
Two outputs (for non-redundant resp.redundant IO)

ACTUATOR

MODUTROL IV MOTOR
NON-SPRING RETURN
FOOT MOUNTED
4-20 MA MODULATING CONTROL SIGNAL
160 DEGREE STROKE
15-30 SECONDS TIMING
8.5 NM / 75 LB-IN TORQUE RATING
15 VA
120 VAC
50/60 HZ

IKB Keyboard

Model Number: 51196694-350/U1 
AID-3 9395-00379-034/B
Key Layout: 101 keys, including a numeric keypad.
Cable Length: 3 meters.
Compatibility: Designed for use with 
Honeywell industrial control systems

Digital Output Module

Transistor output 16 point
(for 0.5A, Source output)

Power Supply Module

Rated inputvoltage:220 VAC
Input voltagerange:176V~264VAC
Input frequency:50 / 60 Hz (47 ~ 63 Hz)
Max. input power:110 VA / 42 W
Inrush current:20A peak and lower (within8 ㎳ )
Efficiency:65% or higher
Output voltage:5VDC (±2%)
Output current:8.5A
Output power:46.75W @ 55℃
Rated switchingvoltage/current:24VDC, 0.5A

Digital Input Module

DC 24V Input, 16 point
(Current source / sink input)

Analog Output module

Current Output: 4 channels
DC 4 ~ 20mA / 0 ~ 20mA

Analog Input module

Current Input: 8 channels
DC 4 ~ 20mA / 0 ~ 20mA

POWER SUPPLY MODULE

Rated inputvoltage:110 VAC
Input voltagerange:85V~132VAC
Input frequency:50 / 60 Hz (47 ~ 63 Hz)
Max. input power:110 VA / 42 W
Inrush current:20A peak and lower (within8 ㎳ )
Efficiency:65% or higher
Output voltage:5VDC (±2%)
Output current:5.5A
Output power:27.5W @ 55℃
Over currentprotection:6.0 A ~ 13.0 A

POWER SUPPLY MODULE

Rated inputvoltage:110 VAC
Input voltagerange:85V~132VAC
Input frequency:50 / 60 Hz (47 ~ 63 Hz)
Max. input power:110 VA / 42 W
Inrush current:20A peak and lower (within8 ㎳ )
Efficiency:65% or higher
Output voltage:5VDC (±2%)
Output current:5.5A
Output power:27.5W @ 55℃
Over currentprotection:6.0 A ~ 13.0 A

Fast Ethernet Module

Fast Ethernet
100/100Mbps
RJ-45 (Electric)
Protocol TCP-IP, UDP-IP
Network Control Protocol(Access Method) CSMA/CD
Transmission Speed: 100 Mbps
Max # of nodes 64

Power Supply Module

AmbientTemp. 0 ~ 55°C
StorageTemp. −25 ~ +70°C
Ambienthumidity 5 ~ 95%RH (Non-condensing)
Peak acceleration: 147m/s2
Duration: 11ms(15G)
Pulse wave type: Half-sine
Square waveimpulse noise ±1,500V
Electrostaticdischarge Voltage: 4kV

memory backup module

C300v5 controller
memory backup module
C300 Memory Backup Assembly

Open Plant Controller

ComfortPoint™ Open solution 
fully programable 
BACnet-Building Controller (B-BC) 
for AHU, RTU and Central Plant applications
CPO-Studio compatible

CPO-Room Controller

ROOM CONTROLLER
CONTROLPOINT
BACNET
MS/TP
6 ANALOG OUTPUTS
4 RELAYS
4 TRIACS
230 VAC

Actuator Controller

Operating Voltage:24 VAC ± 10%
Power Consumption:15 VA
6 DOs (Triac output, 2 reserved for internal actuator)
Maximum voltage: 24 VAC
Maximum continuous current: 500 mA
Minimum current: 30 mA 
3 AOs, 0 -10 Vdc 
Resolution: 12-bit 

I/O bus in extension cabinet

Type number: FS-IOBUS-CPIOX
Approvals: UL, CSA
Connector (top): 34 pole latch (male)
Connectors (other): 34 pole latch (female)
The IOBUS-CPIOX6 is used for 
connection between controller chassis 
and I/O chassis in position 1,2, 3, 4, 5, and 6.

Power Distribution Board

Type numbers: FS-PDB-IO05
Approvals: CE, UL, TUV, CSA
5V-x: 4 pos, action pin, header
WdPx: 8 pole, pin header
DIN EN rails: TS32 / TS35 × 7.5
Used rail length: 171 mm (6.73 in)

Redundant I/O Module

Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C

Redundant I/O Module

Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C

IVEONET QMR Chassis

Input Voltage: 24 VDC
Output Voltage: 5 VDC
Compliance and Approvals: CE, UL, CSA, TUV, FM

SC SIC CABLE

Model Number: FC-SIC2200
Description: SC SIC Cable with two connectors
Length: 20 meters

Safety Manager SC Hardware

Power Supply: 24 VDC
Input Voltage Range: 0–30 VDC
Output Current: 5 A to 16 A
Operating Temperature: -20°C to +60°C