Honeywell

Digital Output Module

Output Channels 32
Output Type Source 
Load Voltage 15 30 VDC Maximum
On-State Voltage 24 V (typ), load current @ 0.5A
Off-State Leak Current 5.0 µA (max)
Turn-On/Turn-Off Time 10 ms (max)

Analog Output Module

900B160202
OUTPUT CARD
ANALOG
HC900 CONTROLLER
CONTROLEDGE
16 CHANNEL
0-60DEG C
21MA INTO 750OHM MAX/CHANNEL

32 Point Digital Input Module

Inputs per module:32 (sinking)
Input Voltage Range:10 VDC to 32 VDC
Peak Voltage:32 VDC
AC Frequency: N/A 
ON Voltage Level:9.5 VDC minimum 
OFF Voltage Level:3.5 VDC maximum 
Input Impedance:6.9 K ohms nominal
Minimum ON Current:1.0 mA 
Maximum OFF Current:0.7 mA 

UNIVERSAL SAFETY INTERFACE MMEM,CC,EUCN

SYSTEM INTERCONNECTION CABLE TERM.ON PIN

POWER DISTR.CABLE MB-0001 TO PDB-0824 BS

Power Distribution Cable

POWER DISTIBUTION CABLE
TRANSFERS POWER 
FROM MB-0001 TO PDB-0824
24 VDC
145 CM LENGTH

POWER DISTRIBUTION CABLE SET IOCHAS-0001

POWER DISTR.CABLE IOCHAS-0003S 5VDC WD

Type number: FS-PDC-IOS05A
Approvals: UL, CSA
Type: SAB 2040415
CC600 4 × 1.5 mm2
Length: 2.45 m
Type: 8 pole, pin header
Weidmuller: BLZP 5.08HC/08/180F SN BK

POWER DISTR.CABLE IOCHAS-0003R 5VDC WD

Type number: FS-PDC-IOR05
Approvals: UL, CSA
Type: SAB 2040707
CC600 7 × 0.75 mm2
Length: 2.45 m
Type: 8 pole, pin header
Weidmuller: BLC 5.08/8 BR
Pins: Weidmuller: DFFC 0.5 - 1.0 SN E

Power Distribution Cable

The red wire represents the +24Vdc
The black wire represents the 0Vdc
Approvals: UL, CSA; FM pending
Housing type: 2 pole socket block 
Weidmuller BLZ 5.08/2F
Crimp pin type: Weidmuller 
DFFC 1.5-2.5 SN E

POWER DISTR.CABLE PDB-CPX05 5VDC WD

POWER DISTRIBUTION CABLE SET CPCHAS

ART PWR DISTR.CABLE IOCHAS-0002 5VDC WD

Power Rail

POWER BUSBAR 
MAX.200A 24/48/110VDC
60CM

POWER BUSBAR MAX.200A 24/48/110VDC,150CM

I/O BUS+FERRITE CPCHAS TO MAX. 4X IOCHAS

I/O BUS+FERRITE CPCHAS TO MAX. 3X IOCHAS

A.R.T. CHASSIS FOR CONTROL PROCESSOR

COMM.CABLE INTERNAL BETWEEN DCOM-CPCHAS