-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
special remind
The warranty of industry automation components and parts that "amikon" 1-year warranty.
CONTROL BOARD
51401551301
CONTROL BOARD
K2LCN-3
MULTI INPUT/OUTPUT
PANEL MOUNT
SINGLE SLOT
Digital Output Module
Optional redundancy
Electronic Overcurrent protection
Configurable Safe-state (FAILOPT)
Extensive internal diagnostics to ensure data integrity
Latched, pulsed or pulse-width modulated output(per channel)
Mounting Carrier
A metal profile
A plastic cover plate
A ground rail with 16 ground connection screws
Two power rails with M5 holes (+24V and 0V)
Four mounting holes (6.35 mm diameter)
Operating temperature: -40 .. +70°C (-40 .. +158°F)
Storage temperature: -40 .. +85°C (-40 .. +185°F)
Relative humidity: 10..95% (non condensing)
Supply voltage: 24 V DC -15%..+30%
Supply rail current: max. 40 A
24V supply: 2 x M5
Analog Input Module
Input Channels:16 Channels
A/D Converter Resolution:16 bits
Input Range:4-20 mA
Normal Mode Rejection Ratio, at 60 Hz:19 dB
Normal Mode Filter Response:Single-pole RC, -3 dB @ 6.5 Hz
Crosstalk, dc to 60 Hz:-60 dB
Maximum Input Voltage:± 30 Volts
Input Scan:Rate 50 ms
Profibus DP gateway module
Integration: Acts as a DP Slave or Master
Data Transfer Rate: Up to 12 Mbps
Max Nodes: 125 nodes per segment
Voltage: 24 V DC (±10%)
Isolation: 500 V AC
Connector: 9-pin D-sub or terminal block
Cable Length: Up to 1,200 meters
Digital Input Module
Galvanic isolation
Open wire detection
Optional redundancy
Direct / Reverse Input Indication
Supplies Non-incendive field power
Internal or external field power selection
Extensive internal diagnostics for data integrity
Digital Input Module
Normal (20ms PV scan)
Low Latency (5ms PV scan)
Extensive internal diagnostics for data integrity
Open Wire Detection (in Normal mode only)
Optional redundancy
Internal or external field power selection
On board excitation power (no need formarshalling power)
Supplies Non-incendive field power
Direct / Reverse Input Indication
I/O Link Interface card
I/O Link Interface Card
51309276-150
High Performance Process Manager (HPMM)
Serves as an interface for I/O modules
facilitating communication between process control
devices and the HPMM system
Analog Input Module
Extensive self-diagnostics
Optional redundancy
Open Wire Detection
Supplies non-incendive field power
field power
Fast loop scan
Open-wire Bad PV Detection
UCN PM Power Supply
Isolated Output: 4–20 mA (HART-enabled)
Load Capacity: ≤600 Ω
Accuracy: ±0.05% of span (typical)
Input Impedance: ≤250 Ω
Channel-to-Channel: 300V AC
Humidity: 5–95% non-condensing
Digital Output 24V Module
CCPDOB01
DISCONTINUED BY MANUFACTURER
OUTPUT MODULE
DIGITAL
80 MA
24 VDC
HPM power supply module
51198651100
POWER SUPPLY
HPM
AC INPUT
AC/DC OUTPUT
100 TO 240 VAC
48 VDC BATTERIES
6 VAC LINE FREQUENCY
REPLACEMENT POWER SUPPLY TO 51198947-100
