-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
special remind
The warranty of industry automation components and parts that "amikon" 1-year warranty.
I/O bus in extension cabinet
Type number: FS-IOBUS-CPIOX
Approvals: UL, CSA
Connector (top): 34 pole latch (male)
Connectors (other): 34 pole latch (female)
The IOBUS-CPIOX6 is used for
connection between controller chassis
and I/O chassis in position 1,2, 3, 4, 5, and 6.
Power Distribution Board
Type numbers: FS-PDB-IO05
Approvals: CE, UL, TUV, CSA
5V-x: 4 pos, action pin, header
WdPx: 8 pole, pin header
DIN EN rails: TS32 / TS35 × 7.5
Used rail length: 171 mm (6.73 in)
Redundant I/O Module
Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C
Redundant I/O Module
Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C
IVEONET QMR Chassis
Input Voltage: 24 VDC
Output Voltage: 5 VDC
Compliance and Approvals: CE, UL, CSA, TUV, FM
SC SIC CABLE
Model Number: FC-SIC2200
Description: SC SIC Cable with two connectors
Length: 20 meters
Safety Universal I/O module
Power supply 24V DC
Rated Current 55mA at 24V
Power dissipation 1.22W at 24V DC with
20mA loop current & 250 Ohm load
Power Indication Green LED
Power/DCS to Field 1500 VAC
Voltage Input 24V DC
Interface to DCS 4 to 20mA with HART
Transfer accuracy at 200C +/- 20uA
Analog Output Module
Output Channels 16
Output Ripple < 100 mV peak-to-peak at
power line frequency, across 250 load
Output Temperature Drift 0.005% of Full Scale/°C
Output Readback Accuracy ±4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale nominal
Resolution ± 0.05% of Full Scale
Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity
Output Current Range 0 mA, 2.9 mA to 21.1 mA
I/O BUS CPCHAS
Rack-mountable unit
180 VA power consumption
20 kg weight
24 V DC power supply
SM RIO Module
Power Supply:24V DC
Current and Voltage Ratings: 0-10V or 4-20mA
Operating Temperature: -20°C to 60°C
Communication Ports: RS-485, RS-232
Analog Output Module
Output Type:4-20 mA
Output Channels:16
Output Temperature Drift:0.005% of Full Scale/°C
Output Readback Accuracy:±4% of Full Scale
Resolution:± 0.05% of Full Scale
Directly Settable Output Current Range:0 mA, 2.9 mA to 21.1 mA
Maximum Resistive Load:800 ohms
Maximum Open Circuit Voltage:22 V
Industrial Current Sensors
Current Rating:300 A
Sensor Type:Closed Loop
Brand:Honeywell
Maximum Operating Temperature: + 85 C
Minimum Operating Temperature: - 40 C
Product Type: Industrial Current Sensors
Subcategory: Sensors
Analog Input Module
Universal Input Output IOTA
Input Channels 1 16 Channels
Common Mode Voltage, dc to 60 Hz -6 to +5 V peak
A/D Converter Resolution 16 bits
Normal Mode Rejection Ratio, at 60 Hz 19 dB
Normal Mode Filter Response Single-pole RC, -3 dB @ 6.5 Hz
Input Impedance (voltage inputs) > 10 M Ω powered
Input Scan Rate 50 ms
High-Speed Network Communication Modules
Supports fiber-optic medium
NFPA Class B or Class A operation
Data is immune to all environmental noise
Optical isolation prevents ground loops
High-Speed NFN fiber-optic medium
Fiber type: 62.5/125 micrometers (multi-mode);
50/125 micrometers (multimode),
or 9/125 micrometers (single mode)
Maximum attenuation: 10 dB with 62.5/125 μm cable, 6
Pulse Input Processor
CE-compliant, not conformally coated
Redundancy not supported
Input Channels: 8
Input Scan Rate: 32 samples per second
Available Input Types:
Rectangular
Sine Wave
Analog Input Module
51309136125
PLC MODULE
SIZE A
HIGH LEVEL ANALOG INPUT
16 INPUTS
SCREW TERMINALS
Digital Input Module
Input Channels 32
Galvanic Isolation 1500 VAC RMS or ±1500 VDC
Isolation Technique Optical (in IOM)
DI Power Voltage Range 18 to 30 VDC
ON Sense Voltage/Current 13 VDC (min) or 3 mA (min)
OFF Sense Voltage/Current 5 VDC (max) or 1.2 mA (max)
Input Impedance 4.2
Absolute Delay Across Input Filter and Isolation 5 ms ± 20%
Field Resistance for Guaranteed ON Condition 300 max @ 15 VDC
Analog Input Module
Output Type 4-20 mA
Output Channels 16
Output Ripple < 100 mV peak-to-peak at
power line frequency, across 250 load
Output Temperature Drift 0.005% of Full Scale/°C
Output Readback Accuracy ±4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale nominal
Resolution ± 0.05% of Full Scale
Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity
Directly Settable Output Current Range 0 mA, 2.9 mA to 21.1 mA
Maximum Output Compliant Voltage 16 V
